HP OfficeJet Pro 9110b Printer Setup (USB Only)

Set up the HP OfficeJet Pro 9110b printer by connecting it to a Windows or Mac computer using a USB cable, with automatic installation and no driver downloads required.

Summary

The HP OfficeJet Pro 9110b printer works with Windows and Mac computers using a USB cable and usually sets itself up automatically without needing drivers.

What You Need

• HP OfficeJet Pro 9110b printer
• Printer power cable
• USB printer cable
• A Windows or Mac computer

Step 1: Unpack and Turn On the Printer

1. Remove all tape and packing materials from the printer.
2. Plug the power cable into the printer and then into a wall outlet.
3. Press the power button to turn the printer on.
4. Follow any simple instructions shown on the printer screen.

Step 2: Connect the Printer to Your Computer

1. Plug the USB cable into the printer.
2. Plug the other end of the USB cable into your computer.
3. Wait while your computer finds the printer.

In most cases, the printer will set itself up on its own. You do not need to download or install any drivers.

Step 3: Make Sure the Printer Was Added

Windows

1. Open Settings.
2. Click Bluetooth & devices.
3. Select Printers & scanners.
4. Look for HP OfficeJet Pro 9110b in the list.

If you see it listed, the printer is ready to use.

---

Mac

1. Open System Settings or System Preferences.
2. Click Printers & Scanners.
3. Look for HP OfficeJet Pro 9110b in the list.

If you see it listed, the printer is ready to use.

---

Step 4: Print a Test Page

1. Open a document or file.
2. Click File > Print.
3. Select HP OfficeJet Pro 9110b.
4. Click Print.

If the page prints, setup is complete.

Troubleshooting

If the printer does not show up:

• Make sure the printer is turned on.
• Unplug the USB cable and plug it back in.
• Try a different USB port on your computer.
• Restart your computer, then reconnect the printer.

If the printer still does not show up, contact IT Services at 616-331-2101 or it@gvsu.edu for further assistance.